6 Safety Tips for Working at Great Heights

6 min read

Working at heights can be a dangerous ordeal. This is especially true if the individual is not properly trained or protected. Failing to take precaution prior to completing the job can result in injuries, costly mistakes and delays.

Rather than have your workers put at risk, you should continue reading below where we’ve outlined some of the most important things you can do to protect your workers from heights. That way, you can ensure all of your workers are safe and protected while getting the job done.

1. Frequently Train Team Members

One of the best things you can do to protect your team members from injury is to provide them with frequent raining. Training team members that will be working from heights can remind them of the correct protocol to follow. As well, training can help to ensure that your members are knowledgeable of the latest trends and ways of completing a job. If a member of your staff has not been frequently trained they may be at risk of forgetting how to complete a task or not be aware of a better, and safer way of doing it.

2. Understand Roofing Regulations

Many workers do not understand the protocol to follow when dealing with roofs. That’s why, it is best to take the time prior to sending a working up to review the regulations you should follow. For example, you may need to have a designated monitor present in addition to your safety gear. Rather than suffer the consequences of an accident you should research the requirements for a particular roof prior to having a contractor complete the job.

3. Select the Best Anchor Point

An anchor point needs to be thoughtfully chosen. When selecting an appropriate anchor point you should make sure it can support the weight of the person as well as an additional 5000 lbs. This can make it difficult find a location to secure an anchor to. However, taking the time to ensure the correct point for the anchors location can have lifesaving results. If you are unsure where to tie off on your job site you should speak with an engineer who can help to guide you to the best point of anchorage.

4. Determine the Best Fall Distance

The height distance can also affect the type of safety equipment that is worn by a worker. As well, depending on the height, certain safety tools may not activate. Many workers are not aware that the length of their lanyard needs to not only account for the length of the height but the length of the individual as well. No accounting for these vital distances can have deadly consequences if an accident were to occur.

5. Inspect the Equipment Regularly

You should complete regular inspections of the fall arrest anchors and safety equipment on your job site. Doing this will help to account for any defects in the equipment that may cause an accident to occur. While doing this, you should look for anything that is out of the ordinary. If you do happen to find equipment that is faulty you should immediately replace it and not allow workers to use it any further. Otherwise, you are placing your workers at risk of injury and setting yourself up for liability.

6. Choose the Correct Equipment for the Job

There are many different types of safety equipment workers can pick from. Knowing which one is appropriate for your particular job can help to prevent accidents, and injuries. Certain equipment is specifically designed for higher distances. Whereas, other forms of safety equipment may be best for short to medium heights.

Load More By Jenny

Leave a Reply

Your email address will not be published. Required fields are marked *